This Salmon Pink-colored (monochromatic) glaze powder allows you to create custom glaze solution by simply mixing with water. Powder to Water ratio is 1:1.
Applied to bisque-fired pieces. Food-grade, Lead-free and Firing Temperature between 1180 to 1250 °C.
Preparation:
1. Prepare the powder and water at 1:1 ratio.
2. Add glaze powder to container
3. Slowly add water while stirring continuously
4. Continue stirring until glaze powder is fully dissolved in water
5. Recommended. Add 2% (by glaze volume) of Gum Solution by Vessel and Glaze© then mix thoroughly.
Application 1 (Dip):
1. Prepare a container large enough to allow entire piece to be submerged in glaze mixture.
2. Recommended. Apply Wax Resist by Vessel and Glaze© at areas not to be glazed.
3. Dip piece entirely in glaze for a few seconds before slowly lifting it up to allow excess glaze to drip back into container.
4. Inspect for drips or uneven areas. Use a clean sponge or brush to touch up and remove excess glaze if needed.
5. For multiple coats, allow the first coat to dry before applying additional coats
Application 2 (brush, sponge, spray):
1. With a brush, sponge, or spray, apply glaze mixture to ceramics.
2. Apply multiple strokes as needed. Allow first coat to dry before applying succeeding coats.